Greenbank

​Two of the most famous "green boxes" in one place. This is a combo pedal featuring the DCW ODR Mod and the DCW Tradition in a single box.  Save an output on your power supply and also some precious pedalboard real estate by using a dual pedal. All the tones of the original ODR-1 pedal with the added benefit of tailoring the bass content. Add to that a flexible Tubescreamer based pedal with added clipping, gain range, and EQ features and you will have all your mid boost and low to mid gain covered. An order toggle switch is added so you can run either side first in your signal chain. ODR into Tradition, or Tradition into ODR at the flip of a switch. Both sides are completely independent and stackable. Additional specs and information for each side can be found on the pages dedicated to the stand alone pedals. 

Now Only $229 USD

Now Only $129 USD

ODR Mod

​Nashville's favorite just got better! The ODR Mod is a hand wired and hand finished pedal based on the Nobels ODR-1 overdrive circuit.  The main complaint with the original pedal is that the build quality is somewhat questionable and that the bass is a bit overpowering for anything more than a tele bridge pickup. The ODR Mod is built with quality components like a professional grade 3PDT footswitch wired for true bypass, quality Neutrik input and output jacks and real Alpha pots with dust seals and also incorporates a bass cut option.  With the bass knob rolled all the way up you will have that massive low end of the original pedal, but this pot allows you to dial that back a bit if you are using a humbucker equipped guitar or darker pickups.  The ODR-1 is often referred to as "Nashville's favorite overdrive", now with the ODR Mod you can have all those session tones of the original in a durable package with even more flexibility.    

- 9V center negative power required (No internal battery connections)

- Less than 30mA current draw 
- Also capable of handling 18V for higher headroom
- Hand wired using through hole construction, no SMD parts

- 1590BB enclosure 4.72 x 3.71 x 1.33" (119.5 x 94 x 34mm)
- In-house powder coated and screen printed enclosures

- Top mounted jacks and power
- True bypass 3PDT switching
- Real Alpha pots with dust seals
- Free shipping anywhere in the USA

- 9V center negative power required (No internal battery connections)

- Less than 20mA current draw 
- Also capable of handling 18V for higher headroom
- Hand wired using through hole construction, no SMD parts
- In-house powder coated and screen printed enclosures
- 125B enclosure 4.77" x 2.6" x 1.39" (121.1mm x 66mm x 35.3mm)
- True bypass 3PDT switching
- Quality Neutrik input and output jacks
- Real Alpha pots with dust seals
- Free shipping anywhere in the USA