ODR Mod
Nashville's favorite just got better! The ODR Mod is a hand wired and hand finished pedal based on the Nobels ODR-1 overdrive circuit. The main complaint with the original pedal is that the build quality is somewhat questionable and that the bass is a bit overpowering for anything more than a tele bridge pickup. The ODR Mod is built with quality components like a professional grade 3PDT footswitch wired for true bypass, quality Neutrik input and output jacks and real Alpha pots with dust seals and also incorporates a bass cut option. With the bass knob rolled all the way up you will have that massive low end of the original pedal, but this pot allows you to dial that back a bit if you are using a humbucker equipped guitar or darker pickups. The ODR-1 is often referred to as "Nashville's favorite overdrive", now with the ODR Mod you can have all those session tones of the original in a durable package with even more flexibility.
- 9V center negative power required (No internal battery connections)
- Also capable of handling 18V for higher headroom
- Hand wired using through hole construction, no SMD parts
- 1590BB enclosure 4.72 x 3.71 x 1.33" (119.5 x 94 x 34mm)
- In-house powder coated and screen printed enclosures
- Top mounted jacks and power
- True bypass 3PDT switching
- Free shipping anywhere in the USA
Now Only $229 USD
Now Only $129 USD
- 9V center negative power required (No internal battery connections)
- Less than 20mA current draw
- Also capable of handling 18V for higher headroom
- Hand wired using through hole construction, no SMD parts
- In-house powder coated and screen printed enclosures
- 125B enclosure 4.77" x 2.6" x 1.39" (121.1mm x 66mm x 35.3mm)
- True bypass 3PDT switching
- Quality Neutrik input and output jacks
- Real Alpha pots with dust seals
- Free shipping anywhere in the USA
Shagbark
Two famous, gig ready pedals in one place. This is a combo pedal featuring the DCW Muskrat and the DCW Tradition in the same box with all the original features. The Muskrat clipping switch offers "Classic" mode using symmetrical silicon diodes just like the original RAT you fell in love with. "Boutique" mode uses asymmetrical silicon diodes for a little more headroom/volume and more clarity. "Turbo" mode uses LEDs for clipping just like the Turbo RAT. Add to that the DCW Tradition, a flexible Tubescreamer based pedal with added clipping options and EQ control. Symmetrical silicon (TS style) and asymmetrical silicon (SD-1 style) are both available. I've also cleaned up the lower end of the gain pot if you want to have the tonal shaping without all the clipping. An order toggle switch is added so you can run either side first in your signal chain. Both sides are completely independent, true bypass and stackable. Grab this box and head to the show!